How do I change from Chlorine or BioGuard® Armour™ to a Chlorine Free Sanitiser?

How do I change from Chlorine or BioGuard® Armour™ to a Chlorine Free Sanitiser?

How do I change from Chlorine or BioGuard® Armour™ to a Chlorine Free Sanitiser?

We recommend changing your water if it is over two months old before starting the change over process.  If your water is under two months old all you need  to do is follow the instructions below.


Step 1. Clear the water

Water as supplied by the water authorities has chlorine included and so this needs to be eliminated if we are to have a chlorine free spa. Simply use Poppits Quick Fix at the rate of 60 grams per 1000 litres of spa water and filter for 4 hours. This will oxidize the chlorine and any other unwanted matter in the water.

Rain water and bore water also needs to be treated.



Step 2. Balance the water

Using a water test kit or test strip, check the pH, alkalinity and calcium hardness levels of the water.

The pH should be around 7.4 – 7.6 to be comfortable for people with sensitive skin. Total alkalinity should be between 80 – 120pp. If necessary, adjust these two levels using Poppits Water Balance to increase the level or Poppit pH decreaser to reduce them.

Calcium levels that are lower than 100ppm can be damaging to equipment, as well as making it difficult to maintain pH levels and ultimately cause the water to go cloudy. 
Rain water is predictably low in calcium. Ideal levels for calcium hardness are between 100 and 200 ppm. To increase calcium levels use spa calcium increaser as per label directions.



Step 3. Sanitize the water

The water is now clear of contaminants and balanced, all that needs to be done is to sanitize the water with a Hydrogen Peroxide Sanitiser , bactericide and clarifier at the rate of one litre per 1000 litres of spa water.






How do I raise the Alkalinity and PH level when using a chlorine free system?

Use Poppit® Spa Pool Water Balance: 
  1. Raises Total Alkalinity and pH in your spa water.
  2. Raises Total Alkalinity up to 25ppm
  3. Maintain the pH within the suggested range of 7.2 - 7.6
  4. Regulates Total Alkalinity between 80 - 120 ppm
  5. Use 45 gms of Poppit® Water Balance per 1000 litre of water
NOTE: Any advice or suggestions above, including but not limited to instructions and dosing rates are intended to be a guide only. Spa Store and its staff recommend you read the full instructions on all chemical containers. We will not accept responsibility for the use of these products.
    • Related Articles

    • BioGuard® Armour™ Spa Sanitiser FAQ

      Do you have questions about BioGuard® Armour™ Spa Sanitiser? Read the detailed article on the Spa Store website that address the following questions and more; What are the benefits to using BioGuard Armour™? What is the shelf life of BioGuard Armour™ ...
    • How do I change over from Chlorine or BioGuard Armour to a Chlorine Free Sanitiser?

      We recommend changing your water if it is over two months old before starting the change over process. If your water is under two months old all you need to do is follow the instructions below. Our Water Care Guide answers this question and more. It ...
    • Where to buy Poppit® spa sanitiser and spa chemicals

      Spa Poppit® sanitiser (also known as Spa Poppits) is an excellent alternative to chlorine santiising in your spa. It uses concentrated hydrogen peroxide to sanitise your spa water, providing a completely chlorine-free spa experience. In this article, ...
    • What sanitisers can I use in my spa?

      Due to the current Worldwide shortage of Lithium, we recommend BioGuard Armour Spa Sanitiser or a hydrogen peroxide based sanitisers, such as Poppits Spa Sanitiser. Both products are available through shop.spaworld.com.au and https://spastore.co.nz ...
    • Why do my test strips show a low chlorine reading?

      Have you added chlorine to your spa pool only to find the chlorine level is low? Click the button below to learn about water quality in a spa including testing and using pH strips. AU: Water care guide NZ: Water care guide Should I use Test Strips? ...