How do I clean, replace and maintain a Vortex laminar jet?

How do I clean, replace and maintain a Vortex laminar jet?

Laminar Jet Versions
As of January, 2021, there have been three versions of Laminar jets.
  1. Version 1: Pre 2016 manufacture
  2. Version 2: Post 2016, pre-2018 manufacture
  3. Version 3: Post 2018 manufacture
Each version requires a different cleaning procedure. Click the button below for detailed instructions on how to clean, replace and maintain Vortex™ Laminar Jets. 
The article below also includes useful videos that show you how to remove the jet from your spa and clean the filters inside. 
Click the relevant country button to read article.

Why do laminar jets need to be cleaned?

Over time, organic and inorganic material can build-up and block the fine filters in the Laminar jets which can reduce or even stop the laminar jet flow.
It's a good idea to check your laminar jet filters as part of the regular maintenance of your spa. 

    • Related Articles

    • How do I replace the laminar jet foam in my vortex spa?

      Laminar jets are a key water feature of Vortex™ Spas. They are designed to create ambience and enhance relaxation. Keeping the Vortex™ spa laminar jets well-maintained allows this feature to perform at its best. Please note: As of January, 2021, ...

    • How do I maintain my spa jets?

      How do I maintain my spa jets? We recommend regularly removing the spa jet faces (internals) to prevent calcium or debris from building up. This is especially important for rotating spa jets. In most case the spa jet face can be removed without ...

    • How to maintain my spa jets

      Taking care of your spa jets requires regular attention and maintenance. However, you don't have to be an expert to effectively look after them. To help you easily keep your spa jets in excellent condition, here are some helpful tips. Tip 1: Regular ...

    • Why does my spa jet keep popping out of it's socket?

      If your spa jet is popping out of it's socket, this could be caused by a one of the following different factors; Your jet face is not screwed in place properly. To resolve this, gently push on the jet face and screw it clockwise to tighten it back ...

    • Jacuzzi® J-13 Powerplay Installation Manual

      To view the Jacuzzi® J-13 Powerplay Installation Manual, please click the button below. Jacuzzi® J-13 Powerplay Installation Manual