Draining Your Spa: A Step-by-Step Guide

How do I drain my spa?

Water in your spa can only be treated for three to four months. After that the water needs to be dumped and refilled with new tap water and the initial start up procedure repeated.
This article explains the steps required to empty, refill and sanitise your spa water.

How often should I drain my spa?

As a guide, water should be changed every three to six months in portable spas and 12 to 18 months for swim spas or as required.

How to empty and replace the water in your spa

As explained above, spa water should be changed every three to six months, while swim spa water can be replaced every 12 to 18 months or as required.
Before emptying your spa, make sure to read the following steps carefully and thoroughly.

Read our comprehensive step-by-by step guide for instructions on how to drain and refill your spa pool. Click the relevant button below. 

Australia:

Learn more about water care

Click the relevant button below to learn more about water care and how to drain your spa:

Australia:




    • Related Articles

    • Why is my Vortex™ and Fisher™ spa not draining?

      Draining and replacing the spa water should be done every three to six months in portable spas and 12 to 18 months for swim spas or as needed. Click the button below to learn how to properly drain the spa water. Australia: How to drain your spa New ...

    • Why is my Jacuzzi® Spa Pool not draining?

      If your Jacuzzi® Spa Pool is not draining, it may be because of a kinked hose or a faulty drain valve. To learn more about troubleshooting and resolving this problem, click the button below. Australia: Spa not draining troubleshooting guide New ...

    • Why does my spa make noise?

      Sometimes spas make gentle noises, but if you hear excessive or strange sounds, it might mean something is wrong. Learning about the common reasons for spa noise can help you figure out what's going on and how to fix it. Click the button below to ...

    • Low Temperature Error on Jacuzzi® J-300™ & J-200™ Series Spas (ICE error message)

      If your control panel displays ICE, it means that a potential freeze condition has been detected. To learn more about this error message, please click the button below. Australia: ICE error code on Jacuzzi® J-300™ New Zealand: ICE error code on ...

    • What's the 4 digit pin for the Fisher Audio Kit?

      Fisher Audio systems that come in the optional Fisher Audio WiFi Kit, require that you enter a four digit pin when pairing with your device. The 4-digit pin for the Fisher™ Wifi/Audio Kit is 5188.