How do I install my grab hand rail?
What is a grab hand rail?
A grab rail in spa pools is a bar or handle that is typically mounted on the side of the spa or pool. It is used as a support or grip for individuals to hold onto when entering, exiting, or moving around the spa. The grab rail provides stability and helps to prevent slips or falls in and around the spa pool.
How to install my grab hand rail
Click the button below to learn how to install a grab hand rail.
What should I do if the grab hand rail is rusting?
If the grab handrail in your spa is rusting, you may take the following steps:
- Clean the rusted area. If the rusting is minor, you can try cleaning it using a Calcium Limescale and Rust Remover, also known as CLR. Gently scrub the rusted area, be careful not to damage the handrail's finish.
- Remove the grab rail. If the grab rail nut is also corroded, you may need to remove the grab rail from the shell, replace the bolt, and apply silicone to the bolt so water cannot get to it, then re-screw the grab rail back on.
- Replace the grab rail. If you notice the rail is corroded as well, it may need a replacement.
Click the appropriate button below to view grab hand rails.
Related Articles
Can I install the ClearLift™ myself?
To ensure that the warranty is not voided and to guarantee proper assembly, we strongly advise using our professional installer to install the ClearLift™. While it may be technically possible to install it yourself, we cannot guarantee the same level ...
Product Update Notice | EcoCube Tech Install Kit Instructions – First Shipment
Due to stock not being available from the supplier, the first shipment of EcoCube™ connection kits were shipped without an SV™ Controller heater union or SV Mini™ heater union. Technicians should use the existing heater unions in the spa to complete ...
How to install a Jacuzzi® J-200™ Series drain valve
Please follow instructions below for installing the J-200 drain valve. 1. Locate drain valve plug in cabinet panel and remove it. 2. Remove front cabinet panel (under touch pad) by unscrewing and removing the top rail and 1 x corner slat, cabinet ...
How to install the Vortex™ Spa App
Vortex Spas™ has its own iOS app for use on the SpaNet™ SV Series control system that comes with the spa. Called 'SmartLink™', this app™ connects your smart device to the SmartLink™ WiFi module on your spa, so you can control your Vortex™ Spa ...
Spa Heat Pump questions
Important note: A licensed electrician must carry out all electrical work on your spa. Any electrical information included here, whether it is troubleshooting or other instructions, are provided for use by a licensed electrician only. Local ...