How to Measure Your Spa Cover

How do I measure my spa cover?

Getting the right measurements is crucial to ensure a perfect fit for your spa cover. 

To measure the spa cover correctly, you may follow the steps below.

Step 1. Measure each side
Step 2. Measure the outer radius
Step 3. Measure the lip of your spa
Step 4. Measure the location of catches

For more detailed information on these steps, please refer to the article below.

Australia

How to measure your spa cover correctly

New Zealand

How to measure your spa cover correctly


Below is a helpful 2-minute video that shows you how to complete the measurements and follows the same format as the measurement sheet. 

  

How to order a new spa cover?

If you're looking for a new spa cover for Vortex™, Fisher™,  Jacuzzi®, and other spa brands,  you can order through our online stores below.

New Zealand

Order new spa cover


You can also fill out the form below and we will be happy to help you choose the spa cover best suited to your needs. 










    • Related Articles

    • How to mount an SCL-09 cover lifter on a Vortex Swim Spa

      Change for mounting SCL-09 Cover Lifters for 2024 Vortex Swim Spa - Aqualap, Hydrozone, and Aquagym Max In PUN 24-01 Vortex 2024 Models, published on January 30th, it was noted that the initial production of 2024 Swim Spa models lacked sufficient ...

    • Can I get a cover for an in-ground or in-deck spa pool?

      Yes, you absolutely can. As the cover sits on the spa edge itself, being in built into the deck doesn't effect the use. You will need to consider where you would like the straps to attach. Our covers come complete with the lock portion, these can be ...

    • Which side should the cover lifter be attached to a Jacuzzi® spa?

      The placement of the cover lifter is crucial for the ease of use and functionality of your Jacuzzi® spa. It should be installed in such a way that when you lift the spa cover, it rises on the side opposite where the touchpad is located. Here are ...

    • How can I get my Fisher™ Spa or Vortex™ Spa out of Demo Mode?

      To exit demo mode on the Fisher™ Spa or Vortex™ Spa, you can follow these steps on any SV Series controller, including Mini controls: 1. Ensure that the spa is completely empty of water and that the heater tube is also empty of water. This will cause ...

    • Spa headrest questions

      Which headrest do I need for my Vortex Spa? There are variations of Headrest sizes so we recommend measuring your current Headrest. Vortex spas models from 2012 onwards: 1. 445mm long with mounting gap 255mm (large) AU: Large headrest for Vortex spas ...