Setting Touchpad for Solar Power

How do I set my touchpad if my spa pool has solar power?

Please ensure you have set your:
  1. Date & Time
  2. Set Temperature
  3. Mode
  4. Your filtration cycle is pre-set
Please refer to the SV Series User Manual below to adjust these settings. 


Instructions for setting your SpaNetâ„¢ touchpad up for solar power

To optimize your solar power during the day, set your sleep timers to begin at night and end in the morning.

Sleep Mode:
If you wish to run your spa during certain times of the day (eg: solar power, avoid peak power times)
  1. Hold down the Up & Down arrow
  2. Press the arrow Up until you get to SNZE
  3. Press SNZE then OK
  4. Arrow down until you see 1.SNZ press OK
  5. Day - arrow down or up to set the days of the week you want the sleep timer to run the press OK
  6. BGN- time you want sleep timer to start then press OK
  7. END- time you want to finish your sleep time
  8. Then press OK to save
Please note: Refer to page 24 of the SV series user guide above. During the sleep time your filtration and heating is disabled.