How do I soften the water in my Hot Springs Spa?
As per instructions for Use:
After initially filling your spa with water, use some hot tub test strips to measure the hardness level of your water. If the reading is in excess of 100ppm, then you need to use a Vanishing Act calcium removal bag to help soften it.
Give the Vanishing Act bag a good rinse through until the water runs through it nice and clear.
Follow instructions on the box for help with the correct positioning of the calcium remover bag, which will differ depending on your spa model.
Usage advice
We strongly urge you, when using a Vanishing Act Calcium Remover bag, to give it a thorough rinse through prior to placing it into the hot tub.
It is advised that the bag is left in the hot tub for 24 hours, ensuring you give it a turn it after 12 hours.
You may find that in areas of particularly hard water, it may take more then one Vanishing Act bag to remove all of the Calcium from larger hot tubs.
Related Articles
How often should I change my spa water?
Our Water Care Guide answers this question and more. It covers the key things you need to know about spa water maintenance, spa chemicals and water treatment. Click the relevant button below to read our Water Care Guide: AU: Water Change Schedule NZ: ...
Can I empty half of my spa water and refill to keep the water longer?
We do not suggest this. It is better to use a spa pipe degreaser and then empty the spa and refill with fresh water. Key tips for making your spa water last longer: 1. Always shower before entering. 2. Keep your spa filters clean. 3. Keep your water ...
What's the water level for my spa?
Every Vortex Spa™ has a water fill line indicator that tells you exactly where to fill your spa. Check your specification sheet for the location of the water fill line. Click the button below to learn more about how to fill your spa pool with water. ...
Why is my Vortex™ and Fisher™ spa not draining?
Draining and replacing the spa water should be done every three to six months in portable spas and 12 to 18 months for swim spas or as needed. Click the button below to learn how to properly drain the spa water. Australia: How to drain your spa New ...
When should I change my Spa Water?
The answer to this depends on how often you use your spa, how well you maintain it and what Chemical System you use. As a rule you should change the water in a spas containing 700L to 4000L on average every 3-4 months for an average user and sooner ...