How long are the power cords in plug and play spas
All Vortex™ and Fisher™ Spas with a 10 or 15 amp rating, come with a 5-metre electrical lead. If you have bought one of these brands, you will need to drill a 60mm hole in the cabinet for the lead and the plug to fit through before you can connect your spa. A cable cover is included in your spa manual pack.
Please note, if your spa is situated further away than the length of the power cord – then your spa must be hardwired by an electrician.
To learn more about the electrical requirements for your spa installation, please click the appropriate button below.
Important note: A licensed electrician must carry out all electrical work on your spa. Any electrical information included here, whether it is troubleshooting or other instructions, are provided for use by a licensed electrician only. Local electrical codes supersede any information found here.
Australia:
Related Articles
Where is the power cord or lead for my spa?
General Location of Spa Power Cord • Equipment Bay: The power cord is typically located in the equipment bay under the touchpad of your spa. • Consult Manual: If unsure, refer to your spa’s specification sheet or user manual to locate the equipment ...
How long is the power for my spa and how many amps does it take?
Important note: The 10 and 15 amp spa models have a pre-installed power lead. The lead is five meters long, measured from the controller inside the spa (not from the spa cabinet), which allows it to extend approximately three meters from the ...
Fisher Spas™ Filter Guide
Need help finding the perfect filter for your Fisher™ spa? This guide will walk you through selecting the right one for your specific model. Be sure to have your spa’s model, and manufacturing date handy. BRAND MODEL MODEL YEAR PLEATED FILTER SKU ...
Arcadia Spas User Manual
This article is designed to provide instructions on how to operate and maintain your Arcadia spa. Download the Acadia Spa User Manual Safety instructions and warnings Important general operating instructions Basic Installation Information Start up ...
What’s the power requirement for Jacuzzi® J-400™ Collection Spas?
The power requirement for Jacuzzi® J-400™ Collection Spas varies depending on how many breaker connections it has. To learn the full details including the electrical conduit pipe location, please click the button below. Australia: Electrical ...