How to change a SpaNet® controller from Fahrenheit to Degrees Celsius
To change the temperature display of SpaNet® controller from Fahrenheit to Degrees Celsius, please follow the steps below.
Press and hold the Air Blower & Clean buttons together until C.LMT comes up - scroll until you reach UNIT press OK, then change from unit display from °F to °C.
Related Articles
SpaNet™ Smart Touch User Manual
Click the button below to download the user manual for the SpaNet™ Smart Touch touch pad. Download SpaNet™ Smart Touch Manual How do I set up my SpaNet™
SpaNet™ SmartLink™ Installation Instructions & User Guide
Everything you need to know about installing and setting up your SpaNet™ SmartLink™ WiFi Module. Download SpaNet™ SmartLink™ User Guide Please note: There are two versions of SmartLink™: The newer version (post-January 2020) is a grey rectangular ...
How to enter Demo Mode on any SpaNet™ controller?
The purpose of Demo mode on any SpaNet™ controller is to allow for the display and demonstration of the spa's features and touchpad functions in a safe and controlled manner without the need for water. This mode disables all the spa's relays, ...
SpaNet™ SV Series Heat Pump Installation & Instruction Manual
Download the SpaNet™ SV Series Heat Pumps Installation & Instruction Manual Guide below: SpaNet™ SV Heat Pump Manual
How do I perform a reset on my SpaNet™ touchpad?
In some situations, the SV controller may not operate as expected or display unusual characters or numbers on the touchpad LCD display. This may be a result of the software memory (EEPROM chip) within the SV controller being corrupted. If you ever ...