How to change SpaNet SpaLink app to Smartlink app
In November, 2023 SpaNet obsoleted the old SpaLink app used to control and monitor older SpaNet VS and SV Mini spa controllers.
The old SpaLink app and server structure which will no longer work and is no longer supported.
A new and improved SmartLink app is available for all customers to use as a replacement.
This the the old SpaLink app Home screen:
This is the new SmartLink Home Screen:
Follow the steps below to change from the SpaLink app to the SmartLink app.
Required Steps:
1) Download the new Spanet SmartLink app from App Store / Play Store
2) Open the app, press on Register (botom right) and complete user registraion
3) Login to new app using registered details
NOTE:
Alternatively, if you do not wish to register you can login via Apple ID or Google account, however if you do this, the app is only single user and other family members will be unable to login and control the spa. For multiple user access please register and then sign in using the email address and password you registered.
4) Go to the spa keypad, enter the WIFI setting, use the DOWN button until RSET (Reset) is displayed, then press OK to execute the RSET command.
5) Wait for 60 seconds after the RSET command has been completed, then reset mains power to spa.
6) After the priming cycle has completed, enter the WIFI setting from the spa keypad again and this time press OK to execute the HOT command.
7) Wait for 60 seconds for the HOT command to execute properly, then follow the SmartLink app setup instructions detailed here.
NOTE: You must remain beside the spa for the duration of the app setup process and have your home WiFi network password with you.
Related Articles
SpaNet™ SmartLink™ Installation Instructions & User Guide
Everything you need to know about installing and setting up your SpaNet™ SmartLink™ WiFi Module. Download SpaNet™ SmartLink™ User Guide Please note: There are two versions of SmartLink™: The newer version (post-January 2020) is a grey rectangular ...SpaNet™ SmartLink™ Installation Instructions & User Guide
The SmartLink™ WiFi module is a device that lets you connect the SpaNet™ SV controller on your Vortex™ Spa, to the internet. That connection allows you to remotely control your Vortex™ Spa through an app. With the SmartLink™ WiFi module and SmartLink ...How to install the Vortex™ Spa App
Vortex Spas™ has its own iOS app for use on the SpaNet™ SV Series control system that comes with the spa. Called 'SmartLink™', this app™ connects your smart device to the SmartLink™ WiFi module on your spa, so you can control your Vortex™ Spa ...SpaNet™ Smart Touch User Manual
Click the button below to download the user manual for the SpaNet™ Smart Touch touch pad. Download SpaNet™ Smart Touch Manual How do I set up my SpaNet™Smartlink™ WiFi Manual
This is the manual for the older, Pre-2019 manual: SpaNet™ SmartLink™ Manual (old version) Important: Please check which version of SmartLink™ controller you have. If your SmartLink™ is the newer version, please refer to the manual below SpaNet™ ...