How to clean headrests in Jacuzzi® Swim Spa
To clean the headrests in your Jacuzzi® Swim Spa, follow these simple steps:
Step 1. Prepare a solution of soapy water using a mild detergent.
Step 2. Take a clean cloth and dampen it with the soapy water solution.
Step 3. Gently wipe the headrests using the damp cloth, ensuring to cover all surfaces.
Step 4. Pay extra attention to any areas that may have accumulated dirt, oils, or residue.
Step 5. Once you have wiped the headrest
Please note you don't need to remove the headrests from the spa to clean them.
How to replace headrests in Jacuzzi® Swim Spas
Here are the step-by-step instructions for replacing the headrests in a Jacuzzi® Swim Spa:
Step 1. Grasp both ends of each headrest.
Step 2. Gently pull inward towards the centre of the swim spa to remove the headrest.
Step 3. Position the headrest over the mounting strip.
Step 4. Press down until the headrest mounting bracket emits a click sound, indicating that it is securely in place.
Step 5. Once the headrest is installed, simply move it up or down as desired.
How to fix a peeling headrest in Jacuzzi® Swim Spas
To fix peeling headrests in your Jacuzzi® Swim Spas, you can follow this straightforward method using Gorilla Construction Adhesive, which can be found at most hardware stores:
Step 1. Ensure that both the surface of the headrest and the mounting area are clean and free of any debris or residue.
Step 2. Apply a thin coat of the Gorilla Construction Adhesive to both the surface of the headrest and the mounting area.
Step 3. Allow the adhesive to dry for approximately 10 minutes or as specified by the adhesive manufacturer. This allows the glue to become tacky and creates a stronger bond.