How to resolve Jacuzzi® GFCI error

How to resolve Jacuzzi® GFCI error

The GFCI trip in Jacuzzi® Spas is a safety feature that protects against the spa heating up if the pump relay gets stuck. It is an important precaution to prevent potential hazards.

This error is not common, but if you encounter this problem, you may follow the troubleshooting steps below.

Important note: All electrical work must be carried out by a licensed electrician. Any electrical information included here, whether it is troubleshooting or other instructions, are provided for use by a licensed electrician only. Local electrical codes supersede any information found here.

Australia:

    • Related Articles

    • Why is my Jacuzzi® Spa Pool reading the wrong temperature?

      The components of your spa pool including the temperature sensor, may wear out or malfunction over time. The sensor may not provide accurate temperature readings if it is old or damaged. To learn how to perform Dipswitch 10 Reset, please click the ...

    • Light flashing red in Jacuzzi® J-200™ Series Spas

      If your Jacuzzi® J-200™ Series Spa is flashing a red light and shows an error message to contact for service, your spa could be having temperature sensor issues. If the error message WATCHDOG CALL FOR SERVICE appears on the spa controller, please ...

    • Jacuzzi® SmartTub™ App - The flow switch is malfunctioning open

      There can be several reasons why your Jacuzzi® SmartTub™ App shows an alert message "The flow switch is malfunctioning open. Heater is disabled." Important note: All electrical work must be carried out by a licensed electrician. Any electrical ...

    • Watchdog Call For Service Error Message on Jacuzzi® Spas

      This error message shows on the control panel when the safety “Watchdog” software has been triggered and the spa is deactivated. A problem has been detected which could cause damage to the spa or its components. The touchpad will alternate between ...

    • FL--1, FL--2, and FL--3 error codes on Jacuzzi® J-200™ Collection Keypad

      FL--1, FL--2, and FL--3 error codes on Jacuzzi® J-200™ Collection Keypad means that your spa’s flow switch is malfunctioning. Your spa heater and Jets Pump 1 may deactivate if this error occurs. In case of these error codes, please contact Spa World™ ...