Lockable Swim Spa Cover Clips Product Update

Lockable Swim Spa Cover Clips Product Update

What is the purpose of the lockable swim spa cover clips product update?

The update aims to ensure swim spa covers meet compliance requirements by swapping the current cover clips on the strap between panels for lockable cover clips.






Which spa models are included in this update?

The models included in this change are Vortex™ Palladium™, Vortex™ Titanium™, and all Swim Spas.

What is the default code for the new lockable clips?

The lock comes with a default code of 00 and can be changed by the customer. 

How many lockable cover clips are installed?      

  1. There are 2 clips (1 on each long side) of Vortex™ Palladium™,  Vortex™ Titanium™, and swim spas up to and including 4.5m.
  2. There are 6 clips (3 on each long side) on 6m swim spas.

From which serial number is the change implemented?

The change has been implemented from serial number H240410023 onwards.

How to change lockable swim spa cover clips

Here’s a detailed, step-by-step guide to changing the code on your lockable swim spa cover clips:

Step 1: Unlock the Clip


Before changing the code, and you must set the correct code, enter the correct combination code to unlock. The default code is “00”.

Step 2: Locate the Reset Button


  1. Open the clip to access the inner side.
  2. Look for a small, round reset button on the inside of the clip.
  3. You will need a screwdriver or another suitable tool to press the reset button.

Step 3: Set a New Code


  1. Use the screwdriver or your chosen tool to press the reset button.
  1. While holding down the reset button, input the new code combination that you want to set.

Step 4: Complete the Reset

After entering the new code, release the reset button. The code will now be updated to the new combination.

Step 5: Set the code on the other clip

Repeat actions from step 1 to step 4 to reset the code on the second clip.

Step 6: Verify the New Codes

After codes are reset on both clips, close and lock the clip.  Enter the new codes to verify that the clip unlocks correctly with your newly set combinations.


    • Related Articles

    • Fisher E Series Swim Spa – Update to SV4 Controller

      FISHER E SERIES SWIM SPA PRODUCT UPDATE NOTICE March 27th, 2024 Overview As of March 27th, 2024, the configuration of the Fisher E-Series swim spas has been updated to include a SV4 controller rather than an SV3 controller. This requires a change to ...

    • How to mount an SCL-09 cover lifter on a Vortex Swim Spa

      Change for mounting SCL-09 Cover Lifters for 2024 Vortex Swim Spa - Aqualap, Hydrozone, and Aquagym Max In PUN 24-01 Vortex 2024 Models, published on January 30th, it was noted that the initial production of 2024 Swim Spa models lacked sufficient ...

    • Where can I purchase spa cover clips and locks? (Spa cover straps broken?)

      Cover safe spa clips which lock onto the spa cover and are a lasting and easy repair for broken spa cover straps or latches and Spa cover locks can be purchased at https://shop.spaworld.com.au/. The top part of these straps permanently pinches onto ...

    • Are your spa cover clips adjustable?

      Yes, the length of our spa cover safe clips can be adjusted. You can make the length longer or shorter by feeding the strap through the buckle. Learn more about cover clips

    • Product Update Notice - Vortex™ 3400 Pergola Update

      What's Different About the New Vortex 3400 Pergola? We're updating the Vortex 3400 Pergola from a double bay to a single bay design. This applies to both motorized and manual versions. Why Did We Update the Vortex 3400 Pergola? This update makes ...