What are the differences between the old and new 2024 Vortex Spa™ model?

What are the differences between the old and new 2024 Vortex Spa™ model?

The 2024 models of selected Vortex Spas™ spa pools and swim spas have been upgraded for enhanced performance, better energy efficiency, and greater comfort.

What are the 2024 Vortex™ Spa Pool feature updates?

The 2024 Vortex™ Spa Pools have nine key updates from previous models. These updates are highlighted in the comparison table below and are available in specific models such as the Mercury™, Nitro™, and Nitro HP™. 

2024 Vortex™ Spa Pools
FeaturePrevious Model2024 Vortex™ Model
Cabinet PanelsPanels consist of horizontal slats. These are wider than the 2024 models.Panels consist of slimmer vertical slats for a more elegant and modern design.
Insulation: EPS Foam BoardsUses foil-backed foam adhered to the inside of the panel.Uses a simpler efficient cabinet insulation system by incorporating EPS Foam Boards
Footwell Base SupportThe base underside of the footwell sits on top of two strips of timber that run across the base of the cabinet.With the 2024 models, the timbers are removed and the footwell is 100% supported making the footwell significantly stronger. The improves structure and removes any flex that might be felt in the previous versions.
TouchpadPrevious Models use push button touch pads2024 models use premium Spanet® SmartTouch™, user-friendly touchscreen pad
HeadrestsPrevious Models used charcoal colour and wider2024 models use lighter grey colour and narrower more refined ergonomic design
Drink holdersFunctions specifically as drink holders and optional speakers are installed on the shell inside the spa cabinet.Dual functionality drink holder and speaker holder for easier installation of the optional Vortex Wifi Audio Kit.
Air controlsUses black dial to control airGrey-coloured air venturi push button for easier air control
Plastics- Grey colourThe filter face, top side controls and other plastic components are charcoal in colour.2024 models make use of grey-coloured plastic components similar to headrests.
Sanitising Purezone AOSPrevious models make use of UV and Ozone, the Ozone generator is not in series and makes use of larger piping, decreasing the water contact time.2024 models make use of Purezone AOS. The Ozone generator is in series and is before the UV purifier, enhancing the sanitising effect.

Note: Purezone AOS does not negate the need to use chemical sanitisers. Customers will still need to follow the dosing instructions on the label of the chemical sanitiser they use.

What are the new 2024 Vortex™ Swim Spa feature updates?

The 2024 Vortex™ Swim Spa series introduces eight major updates compared to earlier models. These updates are outlined below.

Important note: The Vortex™ Swim Spa 2024's new features are currently available on select models, including Aqualap™, Aquagym Max™, and Hydrozone™.

Vortex™ Swim Spa
FeaturePrevious Model2024 Vortex™ Model
Cabinet PanelsPanels consist of horizontal slats. These are wider than the 2024 models.Panels consist of slimmer vertical slats for a more elegant and modern design.
Insulation: EPS Foam BoardsUses foil-backed foam adhered to the inside of the panel.Uses a simpler efficient cabinet insulation system by incorporating EPS Foam Boards
TouchpadPrevious Models use push button touch pads2024 models consist of 2 keypads. A user-friendly Spanet® SmartTouch™ and a push button auxiliary keypad.
Drink holdersFunctions specifically as drink holders and optional speakers are installed on the shell inside the spa cabinet.Dual functionality drink holder and speaker holder for easier installation of the optional Vortex Wifi Audio Kit.

Note: Light appears at the top when a speaker is not installed. Installing a speaker stops the light at the top but still comes out the front.
Jet facesRounded polished face finishChamfered matte finish for a more sophisticated look.
Filter face/SkimmerMake use of 1 skimmer. 3 filter cartridgesMake use of 2 skimmers and 6 filter cartridges. (Hydrozone makes use of 9 filters.)

Note: Not all models have Purezone AOS
Laminar Jets/WaterfallMake use of 4 laminar jetsThree centrally located laminar jets are placed optimally for the ultimate relaxation and water activities.
Grab railMake use of bolt-on grab railThe grab rail is integrated making it more seamless, comfortable and longer lasting.

To learn more about these feature updates, check out the detailed article below.


    • Related Articles

    • What are the changes to the Vortex™ Avante spa pool and swim spa models?

      As of the 29th of August, 2024, Avante™ model spas and swim spas had a name change removing the word Avante from the model names. At the same time the standard model Vortex Spas™, without the Avante™ upgrades, are obsolete and can no longer be ...

    • Lockable Swim Spa Cover Clips Product Update

      What is the purpose of the lockable swim spa cover clips product update? The update aims to ensure swim spa covers meet compliance requirements by swapping the current cover clips on the strap between panels for lockable cover clips. Which spa models ...

    • Product Update Notice - Vortex™ 3400 Pergola Update

      What's Different About the New Vortex 3400 Pergola? We're updating the Vortex 3400 Pergola from a double bay to a single bay design. This applies to both motorized and manual versions. Why Did We Update the Vortex 3400 Pergola? This update makes ...

    • How to mount an SCL-09 cover lifter on a Vortex Swim Spa

      Change for mounting SCL-09 Cover Lifters for 2024 Vortex Swim Spa - Aqualap, Hydrozone, and Aquagym Max In PUN 24-01 Vortex 2024 Models, published on January 30th, it was noted that the initial production of 2024 Swim Spa models lacked sufficient ...

    • Fisher E Series Swim Spa – Update to SV4 Controller

      FISHER E SERIES SWIM SPA PRODUCT UPDATE NOTICE March 27th, 2024 Overview As of March 27th, 2024, the configuration of the Fisher E-Series swim spas has been updated to include a SV4 controller rather than an SV3 controller. This requires a change to ...