Related Articles
How do I replace the UV bulb in my Vortex™ spa?
The team at Vortex Spas™ recommends changing the Purezone™ UV lamp, o-ring and sheath in your Vortex™ Spa at least every two years or when the handy Health Badge light on the external cabinet panel turns red. This should be checked during your ...
How to install a Jacuzzi® J-200™ Series drain valve
Please follow instructions below for installing the J-200 drain valve. 1. Locate drain valve plug in cabinet panel and remove it. 2. Remove front cabinet panel (under touch pad) by unscrewing and removing the top rail and 1 x corner slat, cabinet ...
How do I prepare my spa for transport?
If you need to transport your spa, for example you are moving house or selling the spa, we recommend the following steps: Empty your spa as per the drainage instructions in the owner’s manual. Once the spa is empty, open the cabinet door to gain ...
Daily Programming Guide for Fisher™, Vortex™, and Jacuzzi® Spas
The table below provides a quick reference to key operational settings for various spa models, including sleep timer settings, daily sanitation cycle, pump time out, water clean cycle, and water clean button function. Models Brand Factory Set Daily ...
How to remove the Hydrosoothe™ Headrest on a Jacuzzi® J-300™ series spa pool.
What is a Jacuzzi® Hydrosoothe™ pillow? Starting in 2020, the Jacuzzi® J-300™ series spa pools included on Hydrosoothe™ headrest. This innovative headrest requires special attention for servicing and this article describes the steps to remove the ...