Voice Commands for Google® Assistant

What voice commands can I issue to Google® Assistant?

Google Assistant® will no longer work with SpaNet™ SmartLink app from July 2024 due to a change in Google Assistant. This article is intended explicitly for customers needing information regarding the discontinuation of Google Assistant® integration with SpaNet™.

Whenever you want to issue commands to your spa, start by saying “Hey/OK Google... ask my spa pool.” or “Hey/OK Google... talk to my spa pool” then state your command.

Important reminders:
  1. Please note that Google® Assistant App Actions work only on a mobile phone with Google® Assistant and the SmartLink® app installed. Both the phone's language and Google® Assistant must be set to English (US).
  2. To use this feature, set your phone's locale to English (US).
  3. There is no setup process needed if you have the SmartLink® app installed and are logged into your spa account, and you also have the Google® Assistant app installed.
  4. When giving commands, always end with in SmartLink App. You must say app to ensure it doesn't interpret Smart Link as two separate words, which would trigger a web search instead.

Listed below are the type of commands you can issue to your spa.

Action commands 
  1. "Start my spa” 
  2. "Stop my spa”
  3. “Turn pumps on”/ “Turn pumps off”
  4. “Turn XXX pump on” / “Turn XXX pump off” 
  5. “Turn lights on” / “Turn lights off” 
  6. “Turn lights on XXX” 
  7. “Turn blower on” / “Turn blower off” 
  8. “Start water clean cycle” / “Stop water clean cycle” 

Get Commands
  1. “What’s the water temperature?” 
  2. “What’s the target temperature?” 
  3. “What’s the operating mode?” 
  4. “What’s the heat pump mode?” 
  5. “Current element boost state?” 

Set commands
  1. “Set temperature to XX°C”
  2. “Set filtration to XX hours” 
  3. “Set operating mode to XXX” 
  4. “Set heat pump mode to XXX” 
  5. “Set element boost mode to on/off” 

Please note that you can also use the “change”, “adjust” or “modify” instead of the “set” command.

Click the appropriate button to view the full specifications of each model. 

    • Related Articles

    • Vortex Spas™ Audio WiFi Kit Manual

      Congratulations on your Audio and WiFi upgrade! You can now control your spa remotely from your device and take your spa experience to the next level! Your Vortex™ Audio and WiFi Kit allows you to: • Connect your smart device to your spa pool or swim ...

    • ClearLift™ Troubleshooting Guides

      What should I do if my ClearLift™ cover is not folding or failing to fold? The outer cover is required to fold on top of the inner cover before both covers slide over the side of the spa. If this step is not followed correctly, it may result in a ...

    • I have ordered a cover that is larger than the cover I currently have, will this be an issue?

      A larger or smaller cover runs the risk of being unsafe as a child could gain access to the gap between the cover and the spa and get into the spa itself. You can also have trouble with your cover clips and locks not clipping into place properly and ...

    • How to change SpaNet SpaLink app to Smartlink app

      In November, 2023 SpaNet obsoleted the old SpaLink app used to control and monitor older SpaNet VS and SV Mini spa controllers. The old SpaLink app and server structure which will no longer work and is no longer supported. A new and improved ...

    • Why is my spa tripping?

      There are several reasons why your spa is tripping. To learn how to troubleshoot this issue, please click the appropriate link below. AU: Power Tripping Troubleshooting Guide NZ: Power Tripping Troubleshooting Guide