Which outlet do I plug the light transformer into on the SV controller?

Which outlet do I plug the light transformer into on the SV controller?

The light transformer should be plugged into the 230 Volt outlet.

    • Related Articles

    • SpaNet™ SV series Troubleshooting Guide

      Click the button below to download the troubleshooting guide for the SpaNet® SV series spa controls. SpaNet™ SV Series Troubleshooting Guide
    • How long is the cable on a spa controller?

      The length of the cable on a spa controller can vary depending on the specific model and brand. Please refer to the table below for the power cable length for your spa. Brand and Spa Controller Power Cable Length Vortex™ or Fisher™ Spas with SV2™ Spa ...
    • SpaNet™ SV Series Heat Pump Installation & Instruction Manual

      Download the SpaNet™ SV Series Heat Pumps Installation & Instruction Manual Guide below: SpaNet™ SV Heat Pump Manual
    • SV Series Wiring Diagram

      Click the button below to read the instructions for how to wire your SpaNet™ SV Series controller. Important: A licensed electrician must perform all electrical connections to comply with national and local connections. Wiring the controller is not ...
    • SV Mini Software (EEPROM) Reset

      There might be cases when the SpaNet™ SV Mini controller may not operate as expected or display unusual characters or numbers on the touchpad LCD. Those cases may be caused by the corrupted software memory (EEPROM chip) within the controller. When ...