Why are the lights in my Jacuzzi® Spa not working?

Why are the lights in my Jacuzzi® Spa not working?

The troubleshooting guides for lights not working in Jacuzzi® Spas vary depending on how many lights are affected.
Please click the appropriate button below.

1-3 lights and more than half of the lights aren't working:

All lights not working:

How to perform a J-68 Reset

Click the button below to learn how to perform a J-68 reset.

To view the Jacuzzi®J-400 Printed Circuit Board, please click the button below. 

    • Related Articles

    • How do I clean, replace and maintain a Vortex laminar jet?

      Laminar Jet Versions As of January, 2021, there have been three versions of Laminar jets. Version 1: Pre 2016 manufacture Version 2: Post 2016, pre-2018 manufacture Version 3: Post 2018 manufacture Each version requires a different cleaning ...
    • How do I replace the laminar jet foam in my vortex spa?

      Laminar jets are a key water feature of Vortex™ Spas. They are designed to create ambience and enhance relaxation. Keeping the Vortex™ spa laminar jets well-maintained allows this feature to perform at its best. Please note: As of January, 2021, ...
    • How do I maintain my spa jets?

      How do I maintain my spa jets? We recommend regularly removing the spa jet faces (internals) to prevent calcium or debris from building up. This is especially important for rotating spa jets. In most case the spa jet face can be removed without ...
    • Jacuzzi® J-13 Powerplay Installation Manual

      To view the Jacuzzi® J-13 Powerplay Installation Manual, please click the button below. Jacuzzi® J-13 Powerplay Installation Manual
    • Why does my spa jet keep popping out of it's socket?

      If your spa jet is popping out of it's socket, this could be caused by a one of the following different factors; Your jet face is not screwed in place properly. To resolve this, gently push on the jet face and screw it clockwise to tighten it back ...