Spa Water Foaming Causes & Solutions

Why does my Spa Water foam up?

Wondering why your spa water is foaming?
Click the relevant country button below for full details and tips on why spa water foams and how to fix it:


There are a number of reasons why spa water foams:

1. You have detergent in the water.

Detergent can be found in your swimming clothing, hair, body, sunscreen, lotions and oil based scent.

2. You have oils in your water.

Oils can come from bathers not showering before they enter the spa or swim spa. It can come from un-approved spa scents being used. If you are using scents make sure they are an approved spa aromatherapy and not oil based.

3.pH and Alkalinity not correct

When your spa water goes out of balance it can start to foam as well as cause damage to your spa or irritating rashes on bathers. Test often using test strips designed for your chemical system.
  
   
AU: Shop Test Strips       
    
   


  NZ: Shop Test Strips       
   
   


      





    • Related Articles

    • How often should I change my spa water?

      Our Water Care Guide answers this question and more. It covers the key things you need to know about spa water maintenance, spa chemicals and water treatment. Click the relevant button below to read our Water Care Guide: AU: Water Change Schedule NZ: ...

    • Can I empty half of my spa water and refill to keep the water longer?

      We do not suggest this. It is better to use a spa pipe degreaser and then empty the spa and refill with fresh water. Key tips for making your spa water last longer: 1. Always shower before entering. 2. Keep your spa filters clean. 3. Keep your water ...

    • What's the water level for my spa?

      Every Vortex Spa™ has a water fill line indicator that tells you exactly where to fill your spa. Check your specification sheet for the location of the water fill line. Click the button below to learn more about how to fill your spa pool with water. ...

    • When should I change my Spa Water?

      The answer to this depends on how often you use your spa, how well you maintain it and what Chemical System you use. As a rule you should change the water in a spas containing 700L to 4000L on average every 3-4 months for an average user and sooner ...

    • Why is my spa cover so heavy?

      Spa covers become heavy when the foam inserts become water logged. These inserts can be removed and dried out in the hot sun. If the spa cover's skin has deteriorated beyond repair, replacement spa covers can be purchased from www.spastore.com.au We ...