Why is my spa filter housing/filter face cracked or faded?
Your spa filter housing or filter face may become cracked or faded for several reasons. Some possible causes include:
- Adding undissolved sanitisers directly to the water.
- Overdosing of sanitisers.
- Using pool chlorine or floating bromine dispenser.
- Not keeping the cover open after a dose of chemicals to allow ventilation.
- Age and wear.
Click the appropriate button below to learn more about these causes in our detailed article.
Related Articles
How do I clean, replace and maintain a Vortex laminar jet?
Laminar Jet Versions As of January, 2021, there have been three versions of Laminar jets. Version 1: Pre 2016 manufacture Version 2: Post 2016, pre-2018 manufacture Version 3: Post 2018 manufacture Each version requires a different cleaning ...
How do I replace the laminar jet foam in my vortex spa?
Laminar jets are a key water feature of Vortex™ Spas. They are designed to create ambience and enhance relaxation. Keeping the Vortex™ spa laminar jets well-maintained allows this feature to perform at its best. Please note: As of January, 2021, ...
How do I maintain my spa jets?
How do I maintain my spa jets? We recommend regularly removing the spa jet faces (internals) to prevent calcium or debris from building up. This is especially important for rotating spa jets. In most case the spa jet face can be removed without ...
How to maintain my spa jets
Taking care of your spa jets requires regular attention and maintenance. However, you don't have to be an expert to effectively look after them. To help you easily keep your spa jets in excellent condition, here are some helpful tips. Tip 1: Regular ...
Why does my spa jet keep popping out of it's socket?
If your spa jet is popping out of it's socket, this could be caused by a one of the following different factors; Your jet face is not screwed in place properly. To resolve this, gently push on the jet face and screw it clockwise to tighten it back ...