Why is my touchpad showing LOW, HIGH AND OFF when I press the pump on?
If this happens on your Vortex™ and Fisher™ Spa, it's possible that the Dipswitch 2 is set to ON.
Click the appropriate button below to learn how to set Dipswitch 2 OFF.
Australia
Related Articles
SpaNet™ SV Series Heat Pump Installation & Instruction Manual
Download the SpaNet™ SV Series Heat Pumps Installation & Instruction Manual Guide below: SpaNet™ SV Heat Pump Manual
Spa Heat Pump questions
Important note: A licensed electrician must carry out all electrical work on your spa. Any electrical information included here, whether it is troubleshooting or other instructions, are provided for use by a licensed electrician only. Local ...
SpaNet™ SV series Troubleshooting Guide
Click the button below to download the troubleshooting guide for the SpaNet® SV series spa controls. SpaNet™ SV Series Troubleshooting Guide
SV Mini Software (EEPROM) Reset
There might be cases when the SpaNet™ SV Mini controller may not operate as expected or display unusual characters or numbers on the touchpad LCD. Those cases may be caused by the corrupted software memory (EEPROM chip) within the controller. When ...
What is a heat pump and how can it save me money?
A spa pool heat pump is similar to a heat pump you would use in your home but instead of heating or cooling the air in a room – it works to heat (or cool) the water in your spa. You can use a heat pump to heat or cool spas, swim spas, plunge pools ...