Why is my Vortex™ / Fisher™ Spa touchpad faulty and missing LED lights?

Why is my Vortex™ / Fisher™ Spa touchpad faulty and missing LED lights?

If you are experiencing issues with the touchpad LED display of your spa pool and some LED lights are missing or not functioning properly.

Here are some general steps you can try to resolve the issue.
  1. Reset power. 
  2. Check connections
  3. Replace touchpad.
Click the button below to read our detailed article on resolving this issue. 

    • Related Articles

    • How can I get my Fisher™ Spa or Vortex™ Spa out of Demo Mode?

      To exit demo mode on the Fisher™ Spa or Vortex™ Spa, you can follow these steps on any SV Series controller, including Mini controls: 1. Ensure that the spa is completely empty of water and that the heater tube is also empty of water. This will cause ...
    • What is SpaNet® SmartTouch™ Keypad?

      The SpaNet® SmartTouch™ control panel simplifies the way you manage your spa pool by incorporating touchscreen technology. It has a large 4.3-inch colour display that is easy to read. The screen also works well with wet fingers due to its resistive ...
    • Why are my Hot Spring® spa lights not working?

      Possible causes: Spa touchpad lock activated or lights have faulty wiring. Solution: • Deactivate spa touchpad lock. • Replace light assembly. NOTE: If the problem persists, please contact our Customer Support team via online chat.
    • Why are the LED lights in my Vortex™ and Fisher™ Spa flashing/flickering?

      There are several potential reasons why the LED lights in your Vortex™ and Fisher™ Spa may be flashing or flickering, including the following: Loose or improperly connected light cables. Issues with the main lights. Perimeter lighting issue or ...
    • What do the blue and red light on my Vortex™ SpaNet™ touchpad mean?

      Your SpaNet/Vortex touchpad will have four indicator LEDs on the left hand side. When it lights up RED, it means that it is working. When it is blue/off, it means that it is turned off. Learn more about how to operate your SpaNet™ controller on your ...